Inverto Unicable II Programmable 32UB LNB

Inverto Unicable II Programmable 32UB LNB

Ex Tax: 52.84€
Product Code: IDLU-32UL40-UNBOO-OPP
Stock Instock


Inverto Unicable II Programmable 32UB LNBUnicable II™Programmable 32UB LNBModel: IDLU-32UL40-UNBOO-OPPItem: 5278This Unicable II™ LNB enables installations with up to 32 satellite receivers ...

Inverto Unicable II Programmable 32UB LNB

Unicable II™

Programmable 32UB LNB


Item: 5278

This Unicable II™ LNB enables installations with up to 32 satellite receivers connected over a single coax cable and using the EN50494/

EN50607 protocols providing access to unlimited number of transponders (also known as ‘Dynamic’ mode). Alternatively, it can be

configured to deliver a fixed mapping of transponder frequencies to IF frequencies (also known as ‘Static’ mode), allowing an unlimited

number of receivers to be connected and providing them access to up to 32 transponders based on digital channel stacking technology.

Digital channel stacking technology uses fast wide band analog to digital converters and applies digital signal processing to select desired

transponder channels, up convert them and stack them as IF signals over the Unicable output port. The Unicable II™ LNB offers a full

flexibility of channel selection, supports many more set-top-boxes over existing cabling thus significantly reducing cost and simplifying

installations at subscribers’ homes. The Static mode, allowing an unlimited number of receivers to be connected to the LNB, makes

multi-room distribution and MDU installations substantially cheaper and simpler than ever before. The operating mode - dynamic or

static - output power level, channel bandwidth, UB numbers, center frequencies and dish alignment mode are all programmable and

can be configured and updated in the field using a dedicated programmer device - the SatPal™ Controller*.

The LNB can be powered over a connected STB or by an AC/DC adapter over a power inserter in case the STB is unable to provide the

necessary power. The Unicable II™ is backward compatible, fully compliant with both EN50494 and EN50607 standards and integrates

seamlessly into EN50494-only or mixed EN50494/EN50607 installations of compatible STBs, Next Generation PVRs and HGWs.

For more information on the Unicable II™ technology and its advantages please refer to:

For more information on the SatPal™ technology and its advantages please refer to:

Main Features: 

Low phase Noise HDTV-DVBS2 compliant

Low Noise Figure

Very high cross-pol isolation

Programmable Static frequency mapping mode

Dish alignment mode

Technical Specifications:

Input frequency range - 10.7 GHz ~ 12.75 GHz

LO frequency - 10.4 GHz

Noise figure - 1 dB max.

LO temperature drift @ 25 °C - ±2.5 MHz max.

LO Initial accuracy - ±1.0 MHz max.

LO phase noise @ 10 kHz - -80 dBc/Hz max.

Conversion gain - 55 dB min.

Gain variation (over full band) - ±0.75 dB/UB max.

Image rejection -  40 dB min.

1 dB compression point (@ output) - 0 dBm min.

Cross polarization isolation - 22 dB min.

Output VSWR - 2.5 : 1

Current consumption - 400 mA max. @ 13.5 V

Operating temperature - -30 °C ~ +60 °C

Output impedance - 75 Ω

Output connector type - F-Type (female)

Weight - Configurable, 10 MHz ~ 64 MHz (default 30 MHz)

Bandwidth User Band - 220 g

Number of User Bands - 32 UBs in dynamic mode

Standard configuration - 

  • UB1 1210 MHz (EN50494+EN50607)
  • UB2 1420 MHz (EN50494+EN50607)
  • UB3 1680 MHz (EN50494+EN50607)
  • UB4 2040 MHz (EN50494+EN50607)
  • UB5 984 MHz (EN50494+EN50607)
  • UB6 1020 MHz (EN50494+EN50607)
  • UB7 1056 MHz (EN50494+EN50607)
  • UB8 1092 MHz (EN50494+EN50607)
  • UB9 1128 MHz (EN50607)
  • UB10 1164 MHz (EN50607)
  • UB11 1256 MHz (EN50607)
  • UB12 1292 MHz (EN50607)
  • UB13 1328 MHz (EN50607)
  • UB14 1364 MHz (EN50607)
  • UB15 1458 MHz (EN50607)
  • UB16 1494 MHz (EN50607)
  • UB17 1530 MHz (EN50607)
  • UB18 1566 MHz (EN50607)
  • UB19 1602 MHz (EN50607)
  • UB20 1638 MHz (EN50607)
  • UB21 1716 MHz (EN50607)
  • UB22 1752 MHz (EN50607)
  • UB23 1788 MHz (EN50607)
  • UB24 1824 MHz (EN50607)
  • UB25 1860 MHz (EN50607)
  • UB26 1896 MHz (EN50607)
  • UB27 1932 MHz (EN50607)
  • UB28 1968 MHz (EN50607)
  • UB29 2004 MHz (EN50607)
  • UB30 2076 MHz (EN50607)
  • UB31 2112 MHz (EN50607)
  • UB32 2148 MHz (EN50607)

Channel isolation - 25 dB min.

Control protocols - DiSEqC1.x/DiSEqC2.x, EN50494/EN50607

Want to be sure you’re paying the lowest price?
We will do our best.

We are making everything possible to provide you the best products on the lowest prices possible. Due to the higher number of products in our store we think that is possible some of the prices on our products to not be accurate.

If you find one of our products with lower price than ours, please use this form. We will compare the prices and will offer you the product on the same price!

Here’s how it works:
1. Found a cheaper price?
2. Ask us for a price match - Just fill out the form and we’ll check the details.
3. If you are correct, we will offer you the product for the same price and you can enjoy your stay knowing you got the lowest price.

Please fill in the form below:
* Required fields

Write a review

Note: HTML is not translated!

Rating Bad           Good