Inverto Unicable II Combiner

Inverto Unicable II Combiner

This Unicable™ combiner supports the combination of two RF signals. It enables control signals and DiSEqC commands sent from the Set Top Box to the LNB as well as DiSEqC commands sent from the LNBs to the Set Top Box. This high-quality Unicable™ combiner features low insertion loss, high RF isolation between the input ports and allows greater flexibility in single home or MDU installation scenarios. Typically, the combiner would be installed at a central location (i.e. roof’s attic) to combine signals of two Unicable LNBs or Multiswitches to one coaxial cable stretched inside the house/apartment to a Set Top Box.

Main Features:

• Bi-directional signal distribution
• Low insertion loss
• High isolation between input
• Protective diodes for DC isolation at each input port

Technical specifications

• Frequency range: 5 MHz ~ 2400 MHz
• Inputs: 2x F-type, female
• Output: 1x F-type, female
• Insertion loss: 4 dB max.
• Isolation between ports: 5 MHz ~ 47 MHz : 8 dB / 47MHz ~ 2400 MHz : 16 dB min.
• Input return loss: 10 dB max.
• Output return loss: 8 dB max.
• DC & 22 kHz pass from Output to Input: yes
• Impedance: 75 Ω
• Operating temperature: -30° C ~ +60° C
• Weight: 38 g
• Dimensions (W x D x H): 48.5 mm x 34.8 mm x 14.2mm