Inverto Unicable II 32UB dCSS LNB

Inverto Unicable II 32UB dCSS LNB

Inverto Unicable II Programmable 32UB dCSS LNB it's an lnb  based on digital channel stacking technology and enables installations with up to 32 satellite receivers connected over a single coax cable.

This Unicable II® LNB is based on digital channel stacking technology and enables installations with up to 32 satellite receivers connected over a single coax cable and using the EN50494/EN50607 protocols - also known as ‘Dynamic’ mode. In this mode, the satellite receivers can access any transponder of the received satellite. Alternatively, it can be configured to down-convert a set of 32 transponders (or more, depending on the bandwidth of the desired transponders) and stack them over its output - also known as ‘Static’ mode. This mode allows an unlimited number of receivers to be connected and access these transponders.

Digital channel stacking technology uses fast wideband analog to digital converters and applies digital signal processing to select desired transponder channels, up convert them and stack them as IF signals over the output port. Unicable II® LNBs offer a cost effective and elegant solution for distributing the satellite signals to multiple set-top-boxes (multiroom) or multi-tuner PVRs over existing cabling hence significantly reducing cost and complexity of the installation at the subscribers’ homes. The Static mode, allowing an unlimited number of receivers to be connected to the LNB over a single cable distribution, makes installations in buildings, campuses and closed communities substantially cheaper and simpler than ever before. The operating mode (dynamic/static), output power level, channel bandwidth, UB frequencies and dish alignment mode are all programmable and can be configured and updated in the field using Inverto’s SatPal™ Controller*.

The LNB can be powered over a connected STB or by an AC/DC adapter over a power inserter in case the STB is unable to provide the necessary power. Unicable II® is backward compatible, fully compliant with both EN50494 and EN50607 standards and integrates seamlessly into EN50494-only or mixed EN50494/EN50607 installations of compatible STBs, Next Generation PVRs and HGWs.

For more information on the Unicable II™ technology and its advantages please refer to: www.inverto.tv/what-is-unicable-2

For more information on the SatPal™ technology and its advantages please refer to: www.inverto.tv/satpal

Main Features:

• Low Phase Noise UHD DVBS2 compliant
• Low Noise Figure
• Very high cross-polarization isolation
• Programmable configuration
• Dish alignment mode with fixed gain
• Low power consumption

*SatPal™ Controller not included, sold separately as an optional accessory

Technical specifications

• Input frequency range: 10.7 GHz ~ 12.75 GHz
• Noise figure: 1 dB max.
• LO frequency: 10.4 GHz
• LO frequency accuracy @ 25°C: 1.0 MHz max.
• LO initial accuracy: 500 kHz max.
• LO phase noise @ 1 kHz: -60 dBc / Hz max.
• LO phase noise @ 10 kHz: -80 dBc / Hz max.
• Conversion gain: 55 dB min.
• Gain variation (over full band): ±0.75 dB/UB max.
• Image rejection: 40 dB min.
• 1 dB compression point (@ output): 0 dBm min.
• Cross polarization isolation: 22 dB min.
• Output VSWR: 2.5 : 1 
• Current consumption: 280 mA max. @ 18 VDC
• Operating temperature: -30 °C ~ +60 °C
• Output impedance: 75 Ω
• Output connector type: F-Type (female)
• Weight: 152.5 g

Unicable II™ (dCSS) port specifications:

• Bandwidth User Band: Configurable, 10 MHz ~ 64 MHz (default 36 MHz)
• Output power level (dSCR/dCSS with AGC): -25 dBm (83 dBuV) +/-1 dB
• Number of User Bands: Up to 32 User Bands
• Standard configuration: 32 UBs in dynamic mode
• CH1 1210MHz (EN50494+EN50607)
• CH2 1420MHz (EN50494+EN50607)
• CH3 1680MHz (EN50494+EN50607)
• CH4 2040MHz (EN50494+EN50607)
• CH5 984MHz (EN50494+EN50607)
• CH6 1020MHz (EN50494+EN50607)
• CH7 1056MHz (EN50494+EN50607)
• CH8 1092MHz (EN50494+EN50607)
• CH9 1128MHz (EN50607)
• CH10 1164MHz (EN50607)
• CH11 1256MHz (EN50607)
• CH12 1292MHz (EN50607)
• CH13 1328MHz (EN50607)
• CH14 1364MHz (EN50607)
• CH15 1458MHz (EN50607)
• CH16 1494MHz (EN50607)
• CH17 1530MHz (EN50607)
• CH18 1566MHz (EN50607)
• CH19 1602MHz (EN50607)
• CH20 1638MHz (EN50607)
• CH21 1716MHz (EN50607)
• CH22 1752MHz (EN50607)
• CH23 1788MHz (EN50607)
• CH24 1824MHz (EN50607)
• CH25 1860MHz (EN50607)
• CH26 1896MHz (EN50607)
• CH27 1932MHz (EN50607)
• CH28 1968MHz (EN50607)
• CH29 2004MHz (EN50607)
• CH30 2076MHz (EN50607)
• CH31 2112MHz (EN50607)
• CH32 2148MHz (EN50607)